EPOX An Intel Socket 478 Processor Based Mainboard (400/533MHz) Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
Installation
Page 3-13
NOTES:
Intel ATX version 2.0 specification recommends you use a power
supply that supplies >=1.0 A in 5.0 VSB. However, this mainboard
supports a 5.0 VSB standby power supply > = 0.1A (100mA).
We recommend you use the power supply with 1.0 A in 5.0 VSB, which
supports PCI 2.2 specification for remote power-on and wake-up
functions.
Section 3-5
External Modem Ring Power
ON and Keyboard Power ON Functions (KBPO)
Modem Ring Power ON Function
The I/O chipset provides the two serial ports with the External Modem Ring-in
Power ON function. Once you connect an external modem to COM1 or COM2,
the mainboard enables you to turn on the system through remote and host dial-up
control.
Keyboard Power ON Function
The mainboard features a keyboard power on function that enables you to turn on
the power supply using a keypress. Follow these instructions to enable the Key-
board Power ON function .
Step : Use the Keyboard Power ON function (KBPO) to turn on the system by using
a key press, password, or hot key combination etc. as set in the BIOS Power
Management Setup menu (refer to the BIOS Power Management Setup for
details). The BIOS default setting is keyboard Hot key (<Ctrl> + <F1>). To
power off the system, use the soft-OFF function under Windows 2000/98/
95 (refer to Windows online help).
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

Comentarios a estos manuales

Sin comentarios